关于热力学、热量传递和质量传递,以及流体工程的 A-Z 指南
中文 English Русский Português Español Français Deutsch 关于我们 编辑 联系我们 访问 Begell House
文章 作者

Heggs, Peter J.

Visiting Professor
P.J.Heggs@leeds.ac.uk

School of Chemical and Process Engineering, University of Leeds, Leeds, UK; Dept of Chem Eng, UMIST, Sackville St., Manchester, M60 1QD
205 Engineering Building University of Leeds Leeds Leeds UNITED KINGDOM

Boiling, Condensation, Heat exchangers, Heat transfer enhancement

BSc; PhD; CEng
Visiting Research Professor
University of Leeds, SPEME
September 2008 – Present (8 years 6 months)
University of Leeds
Visiting Reserach Professor
University of Leeds
2008 – Present (9 years)
Emeritus Professor
University of Manchester
2008 – Present (9 years)
Professor of Chemical Engineering
UMIST
1996 – 2004 (8 years)
Professor of Chemical Engineering
Bradford University
May 1986 – May 1994 (8 years 1 month)
Lecturer, Senior Lecturer and Reader in Chemical Engineering
University of Leeds
January 1972 – May 1986 (14 years 5 months)
Senior Process Engineer
Union Carbide Corporation
December 1967 – January 1972 (4 years 2 months)
Selected publications:
Narataruksa, P; Pichitvittayakarn, W; Heggs, PJ; Tia, S Fouling behavior of coconut milk at pasteurization temperatures. Applied Thermal Engineering, vol. 30, pp.1387-1395. 2010.
Alane, A; Rodgers, TL; Heggs, PJ Modelling a Vertical Thermosyphon Reboiler Operating Under Vacuum Using Data from Rigorous Experimental Studies in: Pierucci S (editors) ICHEAP-9: 9TH INTERNATIONAL CONFERENCE ON CHEMICAL AND PROCESS ENGINEERING, PTS 1-3, vol. 17, pp.489-494. 2009
Sacramento-Rivero, JC; Heggs, PJ The Evaluation of a Vent Condenser by the Film and Equilibrium Methods for Steam/Air Mixtures in: HEAT TRANSFER ENGINEERING, vol. 30, pp.590-597. 2009.
Sacramento, JC; Heggs, PJ The role of flooding in the design of vent and reflux condensers in: Applied Thermal Engineering, vol. 29, pp.1338-1345. 2009.
Narataruksa, P; Triratana, P; Pana-Suppamassadu, K; Heggs, PJ; Tia, S Dynamic simulation of plate and frame heat exchanger undergoing food fouling: coconut milk fouling case study. ScienceAsia, vol. 34, pp.229-237. 2008.
Cooke, M; Heggs, PJ; Rodgers, TL The efffect of solids on the dense phase gas fraction and gas-liquid mass transfer at conditions close to the heterogeneous regime in a mechanically agitated vessel. Chemical Engineering Research & Design, vol. 86, pp.869-882. 2008.
Ooi, T.H., Benson, H.R.S. and Heggs, P.J., Reflux Condensation under Vacuum of a Methanol/Water Mixture with Plain tube and Tube Inserts, Heat Transfer Engineering, Vol. 26, Number 7, pp. 3 -10, Sept 2005.
Lane, H.J. and Heggs, P.J., Extended Surface Heat Transfer: The Dovetail Fin, Applied Thermal Engineering, Vol. 25, pp. 2555 – 2565, 2005.
Cooke M. and Heggs P.J., Advantages of the Hollow (concave) Turbine for Multi-Phase Agitation under Intense Operating Conditions, Chemical Engineering Science, Vol. 60, pp 5529 – 5543, 2005.
Marin L., Elliott L., Heggs P.J., Ingham D.B., Lesnic D. and Wen X., Parameter identification in two-dimensional fins using the boundary element method, Numerical Heat Transfer Part A: Applications 50(4) 315-344, 2006.
Pichitvittayakarn W., Narataruksa P., Heggs P. J. and Tia S., Effects of Fluid Flow on Coconut Milk Fouling at Pasteurization Temperatures(70-74.5°C), Songklanakarin Journal of Science and Technology, Vol.28 (6), 2006.
Alane A. and Heggs P. J., The Re-Commissioned Thermosyphon Reboiler Research Facility in the Morton Laboratory, WIT Transactions in Engineering Sciences, Vol. 53, pp 337-350, 2006.
Rivero J. C. S. and Heggs P. J., The Re-Commissioning of a Vent and Reflux Condensation Research Facility for Vacuum and Atmospheric Operation, WIT Transactions in Engineering Sciences, Vol. 53, pp 371-380, 2006.
Heggs P. J. and Somasundram I. M., Fin Performance Ratios Greater than Unity: Not Just A Theoretical Aspiration, Applied Thermal Engineering, 27, 951-961, 2007.
Cooke M., Heggs P. J. and Rodgers T. L., The Effect of Solids on the Dense Phase Gas Fraction and Gas-Solid Mass Transfer at Conditions Close to the Heterogeneous Regime in a Mechanically Agitated Vessel, I.Chem.E, Vol.86(8), Part A, Chemical Engineering Research and Design, pp 869-882, 2008.
Narataruksa P., Triatana P., Pana-Suppamassadu K., Heggs P. J. and Tia S., Dynamic Simulation of Plate and Frame Heat Exchangers undergoing Food Fouling: Coconut Milk Fouling Case Study, ScienceAsia, Vol. 34 (2), pp 229-237, 2008.
Sacramento J. C. and Heggs P. J., The Role of Flooding in the Design of Vent and Reflux Condensers, Applied Thermal Engineering, in Press.

Editorial Boards:

Hybrid Methods in Engineering

Articles:

HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS−MODELING AND EXPERIMENTAL VALIDATION - Vol. 2 '2010 - Computational Thermal Sciences: An International Journal

HEAT TRANSFER IN A PLAIN JACKET OF A PILOT SCALE STIRRED TANK REACTOR - Vol. 0 '2015 - ICHMT DIGITAL LIBRARY ONLINE

HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS - MODELLING AND EXPERIMENTAL VALIDATION - - Vol. 13 '2008 - ICHMT DIGITAL LIBRARY ONLINE

Two-dimensional Heat Flow through Fin Assemblies - Vol. 19 '1981 - ICHMT DIGITAL LIBRARY ONLINE

Calculation of High Temperature Regenerative Heat Exchangers - Vol. 20 '1986 - ICHMT DIGITAL LIBRARY ONLINE

THE PENETRATION OF UNSTEADY FREE CONVECTION FROM A HEATED AND COOLED VERTICAL FLAT SURFACE IN A POROUS MEDIUM - Vol. 3 '1997 - ICHMT DIGITAL LIBRARY ONLINE

HEAT TRANSFER IN PARTICULATE SYSTEMS THE INFAMOUS FILM HEAT TRANSFER COEFFICIENT - Vol. 2 '1994 - International Heat Transfer Conference 10

THE IMPORTANCE OF CORNER HEADER DISTRIBUTOR DESIGNS IN PLATE HEAT EXCHANGERS - Vol. 22 '1994 - International Heat Transfer Conference 10

Experimental Study of Separation in Reflux Condensers - Vol. 50 '2002 - International Heat Transfer Conference 12

CONDUCTION EFFECTS IN RASCHE TILES - Vol. 3 '1970 - International Heat Transfer Conference 4

THE EFFECTS OF PACKING MATERIAL, SIZE AND ARRANGEMENT ON THE PERFORMANCE OF THERMAL REGENERATORS - Vol. 4 '1978 - International Heat Transfer Conference 6

THE EFFECTS OF NON-UNIFORM HEAT TRANSFER COEFFICIENTS IN THE DESIGN OF FINNED TUBE AIR-COOLED HEAT EXCHANGERS - Vol. 15 '1982 - International Heat Transfer Conference 7

CONJUGATE HEAT TRANSFER FROM A DOWNWARD PROJECTING FIN IMMERSED IN A POROUS MEDIUM - Vol. 5 '1986 - International Heat Transfer Conference 8

DIFFERENTIAL FLUID ENTHALPY METHOD FOR PREDICTING HEAT TRANSFER COEFFICIENTS IN PACKED BEDS - Vol. 5 '1986 - International Heat Transfer Conference 8

OSCILLATORY HEAT TRANSFER IN EXTENDED SURFACES - Vol. 4 '1990 - International Heat Transfer Conference 9

Pop, Ioan

CONJUGATE HEAT TRANSFER FROM A DOWNWARD PROJECTING FIN IMMERSED IN A POROUS MEDIUM

THE PENETRATION OF UNSTEADY FREE CONVECTION FROM A HEATED AND COOLED VERTICAL FLAT SURFACE IN A POROUS MEDIUM

Jackson, D. O.

THE IMPORTANCE OF CORNER HEADER DISTRIBUTOR DESIGNS IN PLATE HEAT EXCHANGERS

Davison, P.R.

THE IMPORTANCE OF CORNER HEADER DISTRIBUTOR DESIGNS IN PLATE HEAT EXCHANGERS

Al-Shammari, S. B.

Experimental Study of Separation in Reflux Condensers

Houghton, J. M.

OSCILLATORY HEAT TRANSFER IN EXTENDED SURFACES

Bragg, Robert

Experimental Study of Separation in Reflux Condensers

Stones, P. R.

Two-dimensional Heat Flow through Fin Assemblies

THE EFFECTS OF NON-UNIFORM HEAT TRANSFER COEFFICIENTS IN THE DESIGN OF FINNED TUBE AIR-COOLED HEAT EXCHANGERS

Carpenter, K.J.

THE EFFECTS OF PACKING MATERIAL, SIZE AND ARRANGEMENT ON THE PERFORMANCE OF THERMAL REGENERATORS

Bentham, Erik J

HEAT TRANSFER IN A PLAIN JACKET OF A PILOT SCALE STIRRED TANK REACTOR

Webb, David R.

Experimental Study of Separation in Reflux Condensers

Edwards, M.F.

THE IMPORTANCE OF CORNER HEADER DISTRIBUTOR DESIGNS IN PLATE HEAT EXCHANGERS

Ingham, Derek B.

OSCILLATORY HEAT TRANSFER IN EXTENDED SURFACES

CONJUGATE HEAT TRANSFER FROM A DOWNWARD PROJECTING FIN IMMERSED IN A POROUS MEDIUM

THE PENETRATION OF UNSTEADY FREE CONVECTION FROM A HEATED AND COOLED VERTICAL FLAT SURFACE IN A POROUS MEDIUM

Mahmud, Tariq

HEAT TRANSFER IN A PLAIN JACKET OF A PILOT SCALE STIRRED TANK REACTOR

Bradean, R.

THE PENETRATION OF UNSTEADY FREE CONVECTION FROM A HEATED AND COOLED VERTICAL FLAT SURFACE IN A POROUS MEDIUM

Marhoon, Fatma Salman

HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS - MODELLING AND EXPERIMENTAL VALIDATION -

HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS−MODELING AND EXPERIMENTAL VALIDATION

Gibbard, I.

Experimental Study of Separation in Reflux Condensers

Senior, Peter R.

HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS - MODELLING AND EXPERIMENTAL VALIDATION -

HEAT EXCHANGERS USED IN REFRIGERATION CIRCUITS−MODELING AND EXPERIMENTAL VALIDATION

Gardner, D.

CONJUGATE HEAT TRANSFER FROM A DOWNWARD PROJECTING FIN IMMERSED IN A POROUS MEDIUM

Baclic, B.S.

DIFFERENTIAL FLUID ENTHALPY METHOD FOR PREDICTING HEAT TRANSFER COEFFICIENTS IN PACKED BEDS

Abou Ziyan, H.Z.Z.

DIFFERENTIAL FLUID ENTHALPY METHOD FOR PREDICTING HEAT TRANSFER COEFFICIENTS IN PACKED BEDS

Kumar, H.

THE IMPORTANCE OF CORNER HEADER DISTRIBUTOR DESIGNS IN PLATE HEAT EXCHANGERS

A-Z 索引 作者/编辑 语义地图 视觉画廊 贡献 Guest