Índice A-Z

Goldstein, Richard J.
Professor
rjg@me.umn.edu; rjgme@umn.edu
Heat Transfer Laboratory, Department of Mechanical Engineering, University of Minnesota Twin Cities, 111 Church St SE, Minneapolis, MN-55455, USA
Mechanical Engineering
Gas dynamics, Boundary layers, Mass convection
B.S. 1948, Mechanical Engineering, Cornell University
"Energy separation in the wake of a cylinder: Effect of Reynolds number and acoustic resonance,"K.S. Kulkarni and R.J. Goldstein, International Journal of Heat and Mass Transfer, v 52, n 17-18, p 3994-4000, August 2009
"The heat/mass transfer analogy for a simulated turbine indwell," S. Han and R.J. Goldstein, International Journal of Heat and Mass Transfer, v 51, n 11-12, p 3227-3244, June 2008
"Effects of hole arrangements on local heat/mass transfer for impingement/effusion cooling with small hole spacing," Hyung Hee Cho and Dong Ho Rhee and R.J. Goldstein, Journal of Turbomachinery, v 130, n 4, October 2008
"Energy separation in the wake of a cylinder," R.J. Goldstein and K.S. Kulkarni, Journal of Heat Transfer, v 130, n 6, June 2008
"The heat/mass transfer analogy for a simulated turbine blade," S. Han and R.J. Goldstein, International Journal of Heat and Mass Transfer, v 51, n 21-22, p 5209-5225, October 2008
"Heat transfer study in a linear turbine cascade using a thermal boundary layer measurement technique," S. Han and R.J. Goldstein, Journal of Heat Transfer, v 129, n 10, p 1384-1394, October 2007
"A numerical study of energy separation in a jet flow," Bumsoo Han and R.J. Goldstein, Journal of Heat Transfer, v 129, n 4, p 577-581, April 2007
"Mass transfer from inclined cylinders at moderate Rayleigh number including the effects of end face boundary conditions," R.J. Goldstein and V. Khan and V. Srinivasan, Experimental Thermal and Fluid Science, v 31, n 7, p 741-750, July 2007
"Numerical heat transfer predictions and mass/heat transfer measurements in a linear turbine cascade," M. Papa and R.J. Goldstein and F. Gori, Applied Thermal Engineering, v 27, n 4, p 771-778, March 2007
"Influence of blade leading edge geometry on turbine endwall heat (mass) transfer," S. Han and R.J. Goldstein, Journal of Turbomachinery, v 128, n 4, p 798-813, October 2006
"Heat transfer-A review of 2003 literature," R.J. Goldstein, W.E. Ibele, S.V. Patankar, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F.A. Kulacki, U. Kortshagen, S.Garrick, V.Srinivasan, International Journal of Heat and Mass Transfer, v 49, n 3-4, p 451-534, February 2006
"Influence of blade leading edge geometry on turbine endwall heat(mass) transfer," S. Han and R.J. Goldstein, Proceedings of the ASME Turbo Expo, v 3 PART A, p 547-562, 2005, Proceedings of the ASME Turbo Expo 2005
"Local mass transfer measurements in an inclined enclosure at high Rayleigh number," R.J. Goldstein, H.D. Chiang, V. Srinivasan, A.S. Fleischer, Heat and Mass Transfer/Waerme- und Stoffuebertragung, v 41, n 11, p 991-998, August 2005
"Development of Taylor-Görtler vortices over the pressure surface of a turbine blade," H.P. Wang, S.J. Olson, R.J. Goldstein, Journal of Heat Transfer, v 127, n 5, p 540-543, May 2005
"Gas Turbine Heat Transfer: Part 2 Heat transfer - A review of 2002 literature," R.J. Goldstein, E.R.G. Eckert, W.E. Ibele, S.V. Patankar, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, A. Bar-Cohen, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F.A. Kulacki, U. Kortshagen, S.Garrick, V. Srinivasan International Journal of Heat and Mass Transfer, v 48, n 5, p 819-927, February 2005
"Effects of hole arrangements on local heat/mass transfer for impingement/effusion cooling with small hole spacing," Hyung Hee Cho, Dong Ho Rhee, R.J. Goldstein, Proceedings of the ASME Turbo Expo 2004, v 3, p 643-652, 2004, Proceedings of the ASME Turbo Expo 2004. Volume 3: Heat Transfer: General
“Heat Transfer From a Circular Cylinder to Mixtures of Water and Ethylene Glycol,†S. Santijai, R.J. Goldstein, Int J Heat Trans, Vol 47, pp. 4785-4794, 2004
“Forced Convection Heat Transfer From a Circular Cylinder in Crossflow to Air and Liquids,†S. Santijai, R.J. Goldstein, Int J Heat Trans, Vol 47, pp. 4795-4805, 2004
"Film Cooling of a Row of Discrete Holes With Compound Angle." ASME 2000-GT-248, Transactions of the ASME: Journal of Turbomachinery, vol. 123, pp. 222-230, 2001 (with P. Jin).
"Dynamics of the Vortex Structure of a Jet Impinging on a Convex Surface." Experimental Thermal and Fluid Science, vol. 24, pp. 169-175, 2001 (with A.S. Fleischer and K. Kramer).
"Effect of Freestream Turbulence on Local Mass Transfer from a Circular Cylinder." International Journal of Heat and Mass Transfer, vol. 44, pp. 2863-2875, 2001 (with S. Sanitjai).
"Energy Separation and Acoustic Interactions in Flow Across A Circular Cylinder." Transactions of the ASME: Journal of Heat Transfer, Vol. 123, pp. 682-687, 2001. (with B. Han).
"Numerical Prediction of the Flow Field Near the Tip of a Rotating Turbine Blade." Journal of Engineering Physics and Thermophysics, vol. 74, no. 4, pp. 14-22, 2001.
"Electrochemical Mass Transfer at Moderate Rayleigh numbers." Transactions of the ASME: Journal of Heat Transfer, vol. 123, no. 5, pp. 1015-1017, 2001 (with A.S. Fleischer and P.B. Hogerton).
"Energy Separation in Shear Layers", International Journal of Heat and Mass Transfer, vol. 45, pp. 47-55, 2001. (with B. Han and H.G. Choi).
"Jet Impingement Cooling of a Convex Semi-Cylindrical Surface". International Journal of Thermal Sciences, vol. 40, no. 10, pp. 890-898, 2001. (with C. Cornaro, A.S. Fleischer amd M. Rounds).
Articles:
EFFECT OF FREESTREAM TURBULENCE ON RECOVERY FACTOR OF A CYLINDRICAL TEMPERATURE PROBE(open in a new tab) - Vol. 7 '2015(open in a new tab) - First Thermal and Fluids Engineering Summer Conference(open in a new tab)
Effect of Gap Geometry on the Cooling Effectiveness of the Wheelspace Coolant Injection Upstream of a Row of Rotor Blades(open in a new tab) - Vol. 41 '2010(open in a new tab) - Heat Transfer Research(open in a new tab)
Mass Transfer Systems for Simulating Heat Transfer Processes(open in a new tab) - Vol. 0 '1985(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
EFFECT OF GAP GEOMETRY ON THE COOLING EFFECTIVENESS OF THE WHEELSPACE COOLANT INJECTION UPSTREAM OF A ROW OF ROTOR BLADES(open in a new tab) - Vol. 0 '2009(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
Flow Visualization and Heat/Mass Transfer in a Linear Turbine Cascade with Tip Clearance(open in a new tab) - Vol. 12 '2005(open in a new tab) - ICHMT DIGITAL LIBRARY ONLINE(open in a new tab)
EFFECT OF FIN SHAPE ON FLUID FLOW AND HEAT TRANSFER PERFORMANCE OF STAGGERED SHORT PIN-FIN ARRAYS(open in a new tab) - Vol. 6 '1994(open in a new tab) - International Heat Transfer Conference 10(open in a new tab)
VISUALIZATION OF THE EFFECT OF ACOUSTIC EXCITATION ON VORTEX STRUCTURE AND ENERGY SEPARATION IN JETS(open in a new tab) - Vol. 14 '1998(open in a new tab) - International Heat Transfer Conference 11(open in a new tab)
EFFECT OF ENDWALL BOUNDARY CONDITIONS ON TURBINE BLADE MASS TRANSFER IN THE PRESENCE OF HIGH FREESTREAM TURBULENCE(open in a new tab) - Vol. 18 '1998(open in a new tab) - International Heat Transfer Conference 11(open in a new tab)
MASS TRANSFER DOWNSTREAM OF A 90 DEGREE BEND IN A SQUARE DUCT(open in a new tab) - Vol. 5 '1998(open in a new tab) - International Heat Transfer Conference 11(open in a new tab)
Film cooling effectiveness for a single row of discrete injection holes - influence of hole orientation, shape and blowing rate(open in a new tab) - Vol. 14 '2002(open in a new tab) - International Heat Transfer Conference 12(open in a new tab)
Heat/mass transfer coefficient for a single row of discrete injection holes - influence of hole orientation, shape and blowing rate(open in a new tab) - Vol. 14 '2002(open in a new tab) - International Heat Transfer Conference 12(open in a new tab)
Heat/Mass Transfer and Leakage Flow on the Tip of a Simulated Gas Turbine Blade(open in a new tab) - Vol. 57 '2002(open in a new tab) - International Heat Transfer Conference 12(open in a new tab)
FILM COOLING EFFECT OF THE LEAKAGE THROUGH THE SEAM OF ADJACENT TURBINE BLADE PLATFORMS(open in a new tab) - Vol. 0 '2006(open in a new tab) - International Heat Transfer Conference 13(open in a new tab)
HEAT/MASS TRANSFER IN A LINEAR TURBINE CASCADE WITH A MODIFIED BLADE LEADING EDGE(open in a new tab) - Vol. 0 '2006(open in a new tab) - International Heat Transfer Conference 13(open in a new tab)
Effect of Swirled Leakage Flow on Endwall Film-Cooling(open in a new tab) - Vol. 20 '2014(open in a new tab) - International Heat Transfer Conference 15(open in a new tab)
PREDICTION AND CORRECTION OF SIDEWALL CONDUCTANCE FOR NATURAL CONVECTION IN HORIZONTAL ENCLOSURES(open in a new tab) - Vol. 9 '2018(open in a new tab) - International Heat Transfer Conference 16(open in a new tab)
EDDY HEAT TRANSPORT IN THERMAL CONVECTION WITH VOLUMETRIC ENERGY SOURCES(open in a new tab) - Vol. 4 '1974(open in a new tab) - International Heat Transfer Conference 5(open in a new tab)
EFFECT OF MAINSTREAM ACCELERATION ON ADIABATIC WALL TEMPERATURE AND HEAT TRANSFER DOWNSTREAM OF GAS INJECTION(open in a new tab) - Vol. 5 '1978(open in a new tab) - International Heat Transfer Conference 6(open in a new tab)
FLOW AND TEMPERATURE FIELDS FOLLOWING INJECTION OF A JET NORMAL TO A CROSS STREAM(open in a new tab) - Vol. 5 '1978(open in a new tab) - International Heat Transfer Conference 6(open in a new tab)
SOME MEASUREMENT TECHNIQUES IN HEAT TRANSFER(open in a new tab) - Vol. 6 '1978(open in a new tab) - International Heat Transfer Conference 6(open in a new tab)
CONVECTION IN A HORIZONTAL FLUID LAYER HAVING A SHEAR-FREE UPPER SURFACE AND UNIFORM VOLUMETRIC ENERGY SOURCES(open in a new tab) - Vol. 3 '1982(open in a new tab) - International Heat Transfer Conference 7(open in a new tab)
LOCAL MASS TRANSFER IN RECTANGULAR CAVITIES WITH SEPARATED TURBULENT FLOW(open in a new tab) - Vol. 3 '1986(open in a new tab) - International Heat Transfer Conference 8(open in a new tab)
PLENARI PAPER: COUNT RUMFORD ON THE ART AND SCIENCE OF HEAT TRANSFER(open in a new tab) - Vol. 1 '1990(open in a new tab) - International Heat Transfer Conference 9(open in a new tab)
FLOW AND MASS TRANSFER IN A CURVED WALL JET(open in a new tab) - Vol. 5 '1990(open in a new tab) - International Heat Transfer Conference 9(open in a new tab)
EFFECT OF UPSTREAM WALL SHEAR ON FLOW AND MASS (HEAT) TRANSFER ON A FLAT PLATE DOWNSTREAM OF A SHEAR INDUCING MOVING WALL - A REVIEW(open in a new tab) - Vol. 21 '2014(open in a new tab) - Journal of Enhanced Heat Transfer(open in a new tab)
EFFECTS OF TIP CLEARANCE AND ROTATION ON THREE DIMENSIONAL FLOW FIELDS IN TURBINE CASCADES(open in a new tab) - Vol. 0 '2000(open in a new tab) - Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV(open in a new tab)
Numerical and Experimental Investigation of Heat/Mass Transfer in a Linear Turbine Cascade(open in a new tab) - Vol. 24 '2017(open in a new tab) - Second Thermal and Fluids Engineering Conference(open in a new tab)
Eriksen, V. L.
FLOW AND TEMPERATURE FIELDS FOLLOWING INJECTION OF A JET NORMAL TO A CROSS STREAM
Papa, M.
Flow Visualization and Heat/Mass Transfer in a Linear Turbine Cascade with Tip Clearance
HEAT/MASS TRANSFER IN A LINEAR TURBINE CASCADE WITH A MODIFIED BLADE LEADING EDGE
EFFECT OF GAP GEOMETRY ON THE COOLING EFFECTIVENESS OF THE WHEELSPACE COOLANT INJECTION UPSTREAM OF A ROW OF ROTOR BLADES
Effect of Gap Geometry on the Cooling Effectiveness of the Wheelspace Coolant Injection Upstream of a Row of Rotor Blades
Heat/Mass Transfer and Leakage Flow on the Tip of a Simulated Gas Turbine Blade
Simon, Terrence W.
Effect of Swirled Leakage Flow on Endwall Film-Cooling
Kulacki, F. A.
EDDY HEAT TRANSPORT IN THERMAL CONVECTION WITH VOLUMETRIC ENERGY SOURCES
Ghosh, Kalyanjit
EFFECT OF UPSTREAM WALL SHEAR ON FLOW AND MASS (HEAT) TRANSFER ON A FLAT PLATE DOWNSTREAM OF A SHEAR INDUCING MOVING WALL - A REVIEW
Papa, Francesco
Numerical and Experimental Investigation of Heat/Mass Transfer in a Linear Turbine Cascade
Madanan, Umesh
Numerical and Experimental Investigation of Heat/Mass Transfer in a Linear Turbine Cascade
PREDICTION AND CORRECTION OF SIDEWALL CONDUCTANCE FOR NATURAL CONVECTION IN HORIZONTAL ENCLOSURES
Han , Bumsoo
EFFECTS OF TIP CLEARANCE AND ROTATION ON THREE DIMENSIONAL FLOW FIELDS IN TURBINE CASCADES
Han, Sangjo
Heat/mass transfer coefficient for a single row of discrete injection holes - influence of hole orientation, shape and blowing rate
Film cooling effectiveness for a single row of discrete injection holes - influence of hole orientation, shape and blowing rate
Chen, S. B.
EFFECT OF FIN SHAPE ON FLUID FLOW AND HEAT TRANSFER PERFORMANCE OF STAGGERED SHORT PIN-FIN ARRAYS
Srinivasan, V.
EFFECT OF GAP GEOMETRY ON THE COOLING EFFECTIVENESS OF THE WHEELSPACE COOLANT INJECTION UPSTREAM OF A ROW OF ROTOR BLADES
Effect of Gap Geometry on the Cooling Effectiveness of the Wheelspace Coolant Injection Upstream of a Row of Rotor Blades
Jabbari, M. Y.
MASS TRANSFER DOWNSTREAM OF A 90 DEGREE BEND IN A SQUARE DUCT
FILM COOLING EFFECT OF THE LEAKAGE THROUGH THE SEAM OF ADJACENT TURBINE BLADE PLATFORMS
Jin, P.
Flow Visualization and Heat/Mass Transfer in a Linear Turbine Cascade with Tip Clearance
Wang , Hai-Ping
EFFECT OF ENDWALL BOUNDARY CONDITIONS ON TURBINE BLADE MASS TRANSFER IN THE PRESENCE OF HIGH FREESTREAM TURBULENCE
Chyu, M. K.
LOCAL MASS TRANSFER IN RECTANGULAR CAVITIES WITH SEPARATED TURBULENT FLOW
Kudo, Kazuhiko
CONVECTION IN A HORIZONTAL FLUID LAYER HAVING A SHEAR-FREE UPPER SURFACE AND UNIFORM VOLUMETRIC ENERGY SOURCES
Gori, Fabio
Flow Visualization and Heat/Mass Transfer in a Linear Turbine Cascade with Tip Clearance
HEAT/MASS TRANSFER IN A LINEAR TURBINE CASCADE WITH A MODIFIED BLADE LEADING EDGE
EFFECT OF GAP GEOMETRY ON THE COOLING EFFECTIVENESS OF THE WHEELSPACE COOLANT INJECTION UPSTREAM OF A ROW OF ROTOR BLADES
Effect of Gap Geometry on the Cooling Effectiveness of the Wheelspace Coolant Injection Upstream of a Row of Rotor Blades
Heat/Mass Transfer and Leakage Flow on the Tip of a Simulated Gas Turbine Blade
Jabbari, M. Y.
FLOW AND MASS TRANSFER IN A CURVED WALL JET
EFFECT OF MAINSTREAM ACCELERATION ON ADIABATIC WALL TEMPERATURE AND HEAT TRANSFER DOWNSTREAM OF GAS INJECTION
EFFECT OF FIN SHAPE ON FLUID FLOW AND HEAT TRANSFER PERFORMANCE OF STAGGERED SHORT PIN-FIN ARRAYS
Thor, E. J.
FILM COOLING EFFECT OF THE LEAKAGE THROUGH THE SEAM OF ADJACENT TURBINE BLADE PLATFORMS
Fujimoto, Shu
Effect of Swirled Leakage Flow on Endwall Film-Cooling
Nakamata, Chiyuki
Effect of Swirled Leakage Flow on Endwall Film-Cooling
Seol, Woo Seok
VISUALIZATION OF THE EFFECT OF ACOUSTIC EXCITATION ON VORTEX STRUCTURE AND ENERGY SEPARATION IN JETS
Rask, R.B.
FLOW AND MASS TRANSFER IN A CURVED WALL JET
Ramsey, J. W.
FLOW AND TEMPERATURE FIELDS FOLLOWING INJECTION OF A JET NORMAL TO A CROSS STREAM
Burns, D.V.
MASS TRANSFER DOWNSTREAM OF A 90 DEGREE BEND IN A SQUARE DUCT
Stinson, Matthew
Effect of Swirled Leakage Flow on Endwall Film-Cooling
EFFECT OF FREESTREAM TURBULENCE ON RECOVERY FACTOR OF A CYLINDRICAL TEMPERATURE PROBE