Professor
rjg@me.umn.edu; rjgme@umn.edu
Index A-Z
Goldstein, Richard J.
Heat Transfer Laboratory, Department of Mechanical Engineering, University of Minnesota Twin Cities, 111 Church St SE, Minneapolis, MN-55455, USA
Mechanical Engineering
Gas dynamics, Boundary layers, Mass convection
Ph.D. 1959, M.S. 1950, Mechanical Engineering, M.S. 1951, Physics, University of Minnesota
B.S. 1948, Mechanical Engineering, Cornell University
B.S. 1948, Mechanical Engineering, Cornell University
Research interests are in fluid mechanics, heat transfer, and thermodynamics. Current studies cover a number of problems in natural convection and forced convection as well as the interaction of jets and mainstreams. Specific projects presently under way include thermal convection in enclosures, impingement heat transfer, film cooling, heat transfer augmentation, separated flows, wall jet phenomena, application of mass transfer analogies, flow and heat transfer in pressure die castings, and the development of heat transfer/temperature instrumentation, including optical techniques and microsensors.
Selected Publications
"Energy separation in the wake of a cylinder: Effect of Reynolds number and acoustic resonance,"K.S. Kulkarni and R.J. Goldstein, International Journal of Heat and Mass Transfer, v 52, n 17-18, p 3994-4000, August 2009
"The heat/mass transfer analogy for a simulated turbine indwell," S. Han and R.J. Goldstein, International Journal of Heat and Mass Transfer, v 51, n 11-12, p 3227-3244, June 2008
"Effects of hole arrangements on local heat/mass transfer for impingement/effusion cooling with small hole spacing," Hyung Hee Cho and Dong Ho Rhee and R.J. Goldstein, Journal of Turbomachinery, v 130, n 4, October 2008
"Energy separation in the wake of a cylinder," R.J. Goldstein and K.S. Kulkarni, Journal of Heat Transfer, v 130, n 6, June 2008
"The heat/mass transfer analogy for a simulated turbine blade," S. Han and R.J. Goldstein, International Journal of Heat and Mass Transfer, v 51, n 21-22, p 5209-5225, October 2008
"Heat transfer study in a linear turbine cascade using a thermal boundary layer measurement technique," S. Han and R.J. Goldstein, Journal of Heat Transfer, v 129, n 10, p 1384-1394, October 2007
"A numerical study of energy separation in a jet flow," Bumsoo Han and R.J. Goldstein, Journal of Heat Transfer, v 129, n 4, p 577-581, April 2007
"Mass transfer from inclined cylinders at moderate Rayleigh number including the effects of end face boundary conditions," R.J. Goldstein and V. Khan and V. Srinivasan, Experimental Thermal and Fluid Science, v 31, n 7, p 741-750, July 2007
"Numerical heat transfer predictions and mass/heat transfer measurements in a linear turbine cascade," M. Papa and R.J. Goldstein and F. Gori, Applied Thermal Engineering, v 27, n 4, p 771-778, March 2007
"Influence of blade leading edge geometry on turbine endwall heat (mass) transfer," S. Han and R.J. Goldstein, Journal of Turbomachinery, v 128, n 4, p 798-813, October 2006
"Heat transfer-A review of 2003 literature," R.J. Goldstein, W.E. Ibele, S.V. Patankar, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F.A. Kulacki, U. Kortshagen, S.Garrick, V.Srinivasan, International Journal of Heat and Mass Transfer, v 49, n 3-4, p 451-534, February 2006
"Influence of blade leading edge geometry on turbine endwall heat(mass) transfer," S. Han and R.J. Goldstein, Proceedings of the ASME Turbo Expo, v 3 PART A, p 547-562, 2005, Proceedings of the ASME Turbo Expo 2005
"Local mass transfer measurements in an inclined enclosure at high Rayleigh number," R.J. Goldstein, H.D. Chiang, V. Srinivasan, A.S. Fleischer, Heat and Mass Transfer/Waerme- und Stoffuebertragung, v 41, n 11, p 991-998, August 2005
"Development of Taylor-Görtler vortices over the pressure surface of a turbine blade," H.P. Wang, S.J. Olson, R.J. Goldstein, Journal of Heat Transfer, v 127, n 5, p 540-543, May 2005
"Gas Turbine Heat Transfer: Part 2 Heat transfer - A review of 2002 literature," R.J. Goldstein, E.R.G. Eckert, W.E. Ibele, S.V. Patankar, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, A. Bar-Cohen, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F.A. Kulacki, U. Kortshagen, S.Garrick, V. Srinivasan International Journal of Heat and Mass Transfer, v 48, n 5, p 819-927, February 2005
"Effects of hole arrangements on local heat/mass transfer for impingement/effusion cooling with small hole spacing," Hyung Hee Cho, Dong Ho Rhee, R.J. Goldstein, Proceedings of the ASME Turbo Expo 2004, v 3, p 643-652, 2004, Proceedings of the ASME Turbo Expo 2004. Volume 3: Heat Transfer: General
“Heat Transfer From a Circular Cylinder to Mixtures of Water and Ethylene Glycol,†S. Santijai, R.J. Goldstein, Int J Heat Trans, Vol 47, pp. 4785-4794, 2004
“Forced Convection Heat Transfer From a Circular Cylinder in Crossflow to Air and Liquids,†S. Santijai, R.J. Goldstein, Int J Heat Trans, Vol 47, pp. 4795-4805, 2004
"Film Cooling of a Row of Discrete Holes With Compound Angle." ASME 2000-GT-248, Transactions of the ASME: Journal of Turbomachinery, vol. 123, pp. 222-230, 2001 (with P. Jin).
"Dynamics of the Vortex Structure of a Jet Impinging on a Convex Surface." Experimental Thermal and Fluid Science, vol. 24, pp. 169-175, 2001 (with A.S. Fleischer and K. Kramer).
"Effect of Freestream Turbulence on Local Mass Transfer from a Circular Cylinder." International Journal of Heat and Mass Transfer, vol. 44, pp. 2863-2875, 2001 (with S. Sanitjai).
"Energy Separation and Acoustic Interactions in Flow Across A Circular Cylinder." Transactions of the ASME: Journal of Heat Transfer, Vol. 123, pp. 682-687, 2001. (with B. Han).
"Numerical Prediction of the Flow Field Near the Tip of a Rotating Turbine Blade." Journal of Engineering Physics and Thermophysics, vol. 74, no. 4, pp. 14-22, 2001.
"Electrochemical Mass Transfer at Moderate Rayleigh numbers." Transactions of the ASME: Journal of Heat Transfer, vol. 123, no. 5, pp. 1015-1017, 2001 (with A.S. Fleischer and P.B. Hogerton).
"Energy Separation in Shear Layers", International Journal of Heat and Mass Transfer, vol. 45, pp. 47-55, 2001. (with B. Han and H.G. Choi).
"Jet Impingement Cooling of a Convex Semi-Cylindrical Surface". International Journal of Thermal Sciences, vol. 40, no. 10, pp. 890-898, 2001. (with C. Cornaro, A.S. Fleischer amd M. Rounds).
"Energy separation in the wake of a cylinder: Effect of Reynolds number and acoustic resonance,"K.S. Kulkarni and R.J. Goldstein, International Journal of Heat and Mass Transfer, v 52, n 17-18, p 3994-4000, August 2009
"The heat/mass transfer analogy for a simulated turbine indwell," S. Han and R.J. Goldstein, International Journal of Heat and Mass Transfer, v 51, n 11-12, p 3227-3244, June 2008
"Effects of hole arrangements on local heat/mass transfer for impingement/effusion cooling with small hole spacing," Hyung Hee Cho and Dong Ho Rhee and R.J. Goldstein, Journal of Turbomachinery, v 130, n 4, October 2008
"Energy separation in the wake of a cylinder," R.J. Goldstein and K.S. Kulkarni, Journal of Heat Transfer, v 130, n 6, June 2008
"The heat/mass transfer analogy for a simulated turbine blade," S. Han and R.J. Goldstein, International Journal of Heat and Mass Transfer, v 51, n 21-22, p 5209-5225, October 2008
"Heat transfer study in a linear turbine cascade using a thermal boundary layer measurement technique," S. Han and R.J. Goldstein, Journal of Heat Transfer, v 129, n 10, p 1384-1394, October 2007
"A numerical study of energy separation in a jet flow," Bumsoo Han and R.J. Goldstein, Journal of Heat Transfer, v 129, n 4, p 577-581, April 2007
"Mass transfer from inclined cylinders at moderate Rayleigh number including the effects of end face boundary conditions," R.J. Goldstein and V. Khan and V. Srinivasan, Experimental Thermal and Fluid Science, v 31, n 7, p 741-750, July 2007
"Numerical heat transfer predictions and mass/heat transfer measurements in a linear turbine cascade," M. Papa and R.J. Goldstein and F. Gori, Applied Thermal Engineering, v 27, n 4, p 771-778, March 2007
"Influence of blade leading edge geometry on turbine endwall heat (mass) transfer," S. Han and R.J. Goldstein, Journal of Turbomachinery, v 128, n 4, p 798-813, October 2006
"Heat transfer-A review of 2003 literature," R.J. Goldstein, W.E. Ibele, S.V. Patankar, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F.A. Kulacki, U. Kortshagen, S.Garrick, V.Srinivasan, International Journal of Heat and Mass Transfer, v 49, n 3-4, p 451-534, February 2006
"Influence of blade leading edge geometry on turbine endwall heat(mass) transfer," S. Han and R.J. Goldstein, Proceedings of the ASME Turbo Expo, v 3 PART A, p 547-562, 2005, Proceedings of the ASME Turbo Expo 2005
"Local mass transfer measurements in an inclined enclosure at high Rayleigh number," R.J. Goldstein, H.D. Chiang, V. Srinivasan, A.S. Fleischer, Heat and Mass Transfer/Waerme- und Stoffuebertragung, v 41, n 11, p 991-998, August 2005
"Development of Taylor-Görtler vortices over the pressure surface of a turbine blade," H.P. Wang, S.J. Olson, R.J. Goldstein, Journal of Heat Transfer, v 127, n 5, p 540-543, May 2005
"Gas Turbine Heat Transfer: Part 2 Heat transfer - A review of 2002 literature," R.J. Goldstein, E.R.G. Eckert, W.E. Ibele, S.V. Patankar, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, A. Bar-Cohen, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F.A. Kulacki, U. Kortshagen, S.Garrick, V. Srinivasan International Journal of Heat and Mass Transfer, v 48, n 5, p 819-927, February 2005
"Effects of hole arrangements on local heat/mass transfer for impingement/effusion cooling with small hole spacing," Hyung Hee Cho, Dong Ho Rhee, R.J. Goldstein, Proceedings of the ASME Turbo Expo 2004, v 3, p 643-652, 2004, Proceedings of the ASME Turbo Expo 2004. Volume 3: Heat Transfer: General
“Heat Transfer From a Circular Cylinder to Mixtures of Water and Ethylene Glycol,†S. Santijai, R.J. Goldstein, Int J Heat Trans, Vol 47, pp. 4785-4794, 2004
“Forced Convection Heat Transfer From a Circular Cylinder in Crossflow to Air and Liquids,†S. Santijai, R.J. Goldstein, Int J Heat Trans, Vol 47, pp. 4795-4805, 2004
"Film Cooling of a Row of Discrete Holes With Compound Angle." ASME 2000-GT-248, Transactions of the ASME: Journal of Turbomachinery, vol. 123, pp. 222-230, 2001 (with P. Jin).
"Dynamics of the Vortex Structure of a Jet Impinging on a Convex Surface." Experimental Thermal and Fluid Science, vol. 24, pp. 169-175, 2001 (with A.S. Fleischer and K. Kramer).
"Effect of Freestream Turbulence on Local Mass Transfer from a Circular Cylinder." International Journal of Heat and Mass Transfer, vol. 44, pp. 2863-2875, 2001 (with S. Sanitjai).
"Energy Separation and Acoustic Interactions in Flow Across A Circular Cylinder." Transactions of the ASME: Journal of Heat Transfer, Vol. 123, pp. 682-687, 2001. (with B. Han).
"Numerical Prediction of the Flow Field Near the Tip of a Rotating Turbine Blade." Journal of Engineering Physics and Thermophysics, vol. 74, no. 4, pp. 14-22, 2001.
"Electrochemical Mass Transfer at Moderate Rayleigh numbers." Transactions of the ASME: Journal of Heat Transfer, vol. 123, no. 5, pp. 1015-1017, 2001 (with A.S. Fleischer and P.B. Hogerton).
"Energy Separation in Shear Layers", International Journal of Heat and Mass Transfer, vol. 45, pp. 47-55, 2001. (with B. Han and H.G. Choi).
"Jet Impingement Cooling of a Convex Semi-Cylindrical Surface". International Journal of Thermal Sciences, vol. 40, no. 10, pp. 890-898, 2001. (with C. Cornaro, A.S. Fleischer amd M. Rounds).
Articles:
EFFECT OF FREESTREAM TURBULENCE ON RECOVERY FACTOR OF A CYLINDRICAL TEMPERATURE PROBE - Vol. 7 '2015 - First Thermal and Fluids Engineering Summer Conference
Effect of Gap Geometry on the Cooling Effectiveness of the Wheelspace Coolant Injection Upstream of a Row of Rotor Blades - Vol. 41 '2010 - Heat Transfer Research
Mass Transfer Systems for Simulating Heat Transfer Processes - Vol. 0 '1985 - ICHMT DIGITAL LIBRARY ONLINE
EFFECT OF GAP GEOMETRY ON THE COOLING EFFECTIVENESS OF THE WHEELSPACE COOLANT INJECTION UPSTREAM OF A ROW OF ROTOR BLADES - Vol. 0 '2009 - ICHMT DIGITAL LIBRARY ONLINE
Flow Visualization and Heat/Mass Transfer in a Linear Turbine Cascade with Tip Clearance - Vol. 12 '2005 - ICHMT DIGITAL LIBRARY ONLINE
EFFECT OF FIN SHAPE ON FLUID FLOW AND HEAT TRANSFER PERFORMANCE OF STAGGERED SHORT PIN-FIN ARRAYS - Vol. 6 '1994 - International Heat Transfer Conference 10
VISUALIZATION OF THE EFFECT OF ACOUSTIC EXCITATION ON VORTEX STRUCTURE AND ENERGY SEPARATION IN JETS - Vol. 14 '1998 - International Heat Transfer Conference 11
EFFECT OF ENDWALL BOUNDARY CONDITIONS ON TURBINE BLADE MASS TRANSFER IN THE PRESENCE OF HIGH FREESTREAM TURBULENCE - Vol. 18 '1998 - International Heat Transfer Conference 11
MASS TRANSFER DOWNSTREAM OF A 90 DEGREE BEND IN A SQUARE DUCT - Vol. 5 '1998 - International Heat Transfer Conference 11
Film cooling effectiveness for a single row of discrete injection holes - influence of hole orientation, shape and blowing rate - Vol. 14 '2002 - International Heat Transfer Conference 12
Heat/mass transfer coefficient for a single row of discrete injection holes - influence of hole orientation, shape and blowing rate - Vol. 14 '2002 - International Heat Transfer Conference 12
Heat/Mass Transfer and Leakage Flow on the Tip of a Simulated Gas Turbine Blade - Vol. 57 '2002 - International Heat Transfer Conference 12
FILM COOLING EFFECT OF THE LEAKAGE THROUGH THE SEAM OF ADJACENT TURBINE BLADE PLATFORMS - Vol. 0 '2006 - International Heat Transfer Conference 13
HEAT/MASS TRANSFER IN A LINEAR TURBINE CASCADE WITH A MODIFIED BLADE LEADING EDGE - Vol. 0 '2006 - International Heat Transfer Conference 13
Effect of Swirled Leakage Flow on Endwall Film-Cooling - Vol. 20 '2014 - International Heat Transfer Conference 15
PREDICTION AND CORRECTION OF SIDEWALL CONDUCTANCE FOR NATURAL CONVECTION IN HORIZONTAL ENCLOSURES - Vol. 9 '2018 - International Heat Transfer Conference 16
EDDY HEAT TRANSPORT IN THERMAL CONVECTION WITH VOLUMETRIC ENERGY SOURCES - Vol. 4 '1974 - International Heat Transfer Conference 5
EFFECT OF MAINSTREAM ACCELERATION ON ADIABATIC WALL TEMPERATURE AND HEAT TRANSFER DOWNSTREAM OF GAS INJECTION - Vol. 5 '1978 - International Heat Transfer Conference 6
FLOW AND TEMPERATURE FIELDS FOLLOWING INJECTION OF A JET NORMAL TO A CROSS STREAM - Vol. 5 '1978 - International Heat Transfer Conference 6
SOME MEASUREMENT TECHNIQUES IN HEAT TRANSFER - Vol. 6 '1978 - International Heat Transfer Conference 6
CONVECTION IN A HORIZONTAL FLUID LAYER HAVING A SHEAR-FREE UPPER SURFACE AND UNIFORM VOLUMETRIC ENERGY SOURCES - Vol. 3 '1982 - International Heat Transfer Conference 7
LOCAL MASS TRANSFER IN RECTANGULAR CAVITIES WITH SEPARATED TURBULENT FLOW - Vol. 3 '1986 - International Heat Transfer Conference 8
PLENARI PAPER: COUNT RUMFORD ON THE ART AND SCIENCE OF HEAT TRANSFER - Vol. 1 '1990 - International Heat Transfer Conference 9
FLOW AND MASS TRANSFER IN A CURVED WALL JET - Vol. 5 '1990 - International Heat Transfer Conference 9
EFFECT OF UPSTREAM WALL SHEAR ON FLOW AND MASS (HEAT) TRANSFER ON A FLAT PLATE DOWNSTREAM OF A SHEAR INDUCING MOVING WALL - A REVIEW - Vol. 21 '2014 - Journal of Enhanced Heat Transfer
EFFECTS OF TIP CLEARANCE AND ROTATION ON THREE DIMENSIONAL FLOW FIELDS IN TURBINE CASCADES - Vol. 0 '2000 - Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV
Numerical and Experimental Investigation of Heat/Mass Transfer in a Linear Turbine Cascade - Vol. 24 '2017 - Second Thermal and Fluids Engineering Conference
Eriksen, V. L.
FLOW AND TEMPERATURE FIELDS FOLLOWING INJECTION OF A JET NORMAL TO A CROSS STREAM
Papa, M.
Flow Visualization and Heat/Mass Transfer in a Linear Turbine Cascade with Tip Clearance
HEAT/MASS TRANSFER IN A LINEAR TURBINE CASCADE WITH A MODIFIED BLADE LEADING EDGE
EFFECT OF GAP GEOMETRY ON THE COOLING EFFECTIVENESS OF THE WHEELSPACE COOLANT INJECTION UPSTREAM OF A ROW OF ROTOR BLADES
Effect of Gap Geometry on the Cooling Effectiveness of the Wheelspace Coolant Injection Upstream of a Row of Rotor Blades
Heat/Mass Transfer and Leakage Flow on the Tip of a Simulated Gas Turbine Blade
Simon, Terrence W.
Effect of Swirled Leakage Flow on Endwall Film-Cooling
Kulacki, F. A.
EDDY HEAT TRANSPORT IN THERMAL CONVECTION WITH VOLUMETRIC ENERGY SOURCES
Ghosh, Kalyanjit
EFFECT OF UPSTREAM WALL SHEAR ON FLOW AND MASS (HEAT) TRANSFER ON A FLAT PLATE DOWNSTREAM OF A SHEAR INDUCING MOVING WALL - A REVIEW
Papa, Francesco
Numerical and Experimental Investigation of Heat/Mass Transfer in a Linear Turbine Cascade
Madanan, Umesh
Numerical and Experimental Investigation of Heat/Mass Transfer in a Linear Turbine Cascade
PREDICTION AND CORRECTION OF SIDEWALL CONDUCTANCE FOR NATURAL CONVECTION IN HORIZONTAL ENCLOSURES
Han , Bumsoo
EFFECTS OF TIP CLEARANCE AND ROTATION ON THREE DIMENSIONAL FLOW FIELDS IN TURBINE CASCADES
Han, Sangjo
Heat/mass transfer coefficient for a single row of discrete injection holes - influence of hole orientation, shape and blowing rate
Film cooling effectiveness for a single row of discrete injection holes - influence of hole orientation, shape and blowing rate
Chen, S. B.
EFFECT OF FIN SHAPE ON FLUID FLOW AND HEAT TRANSFER PERFORMANCE OF STAGGERED SHORT PIN-FIN ARRAYS
Srinivasan, V.
EFFECT OF GAP GEOMETRY ON THE COOLING EFFECTIVENESS OF THE WHEELSPACE COOLANT INJECTION UPSTREAM OF A ROW OF ROTOR BLADES
Effect of Gap Geometry on the Cooling Effectiveness of the Wheelspace Coolant Injection Upstream of a Row of Rotor Blades
Jabbari, M. Y.
MASS TRANSFER DOWNSTREAM OF A 90 DEGREE BEND IN A SQUARE DUCT
FILM COOLING EFFECT OF THE LEAKAGE THROUGH THE SEAM OF ADJACENT TURBINE BLADE PLATFORMS
Jin, P.
Flow Visualization and Heat/Mass Transfer in a Linear Turbine Cascade with Tip Clearance
Wang , Hai-Ping
EFFECT OF ENDWALL BOUNDARY CONDITIONS ON TURBINE BLADE MASS TRANSFER IN THE PRESENCE OF HIGH FREESTREAM TURBULENCE
Chyu, M. K.
LOCAL MASS TRANSFER IN RECTANGULAR CAVITIES WITH SEPARATED TURBULENT FLOW
Kudo, Kazuhiko
CONVECTION IN A HORIZONTAL FLUID LAYER HAVING A SHEAR-FREE UPPER SURFACE AND UNIFORM VOLUMETRIC ENERGY SOURCES
Gori, Fabio
Flow Visualization and Heat/Mass Transfer in a Linear Turbine Cascade with Tip Clearance
HEAT/MASS TRANSFER IN A LINEAR TURBINE CASCADE WITH A MODIFIED BLADE LEADING EDGE
EFFECT OF GAP GEOMETRY ON THE COOLING EFFECTIVENESS OF THE WHEELSPACE COOLANT INJECTION UPSTREAM OF A ROW OF ROTOR BLADES
Effect of Gap Geometry on the Cooling Effectiveness of the Wheelspace Coolant Injection Upstream of a Row of Rotor Blades
Heat/Mass Transfer and Leakage Flow on the Tip of a Simulated Gas Turbine Blade
Jabbari, M. Y.
FLOW AND MASS TRANSFER IN A CURVED WALL JET
EFFECT OF MAINSTREAM ACCELERATION ON ADIABATIC WALL TEMPERATURE AND HEAT TRANSFER DOWNSTREAM OF GAS INJECTION
EFFECT OF FIN SHAPE ON FLUID FLOW AND HEAT TRANSFER PERFORMANCE OF STAGGERED SHORT PIN-FIN ARRAYS
Thor, E. J.
FILM COOLING EFFECT OF THE LEAKAGE THROUGH THE SEAM OF ADJACENT TURBINE BLADE PLATFORMS
Fujimoto, Shu
Effect of Swirled Leakage Flow on Endwall Film-Cooling
Nakamata, Chiyuki
Effect of Swirled Leakage Flow on Endwall Film-Cooling
Seol, Woo Seok
VISUALIZATION OF THE EFFECT OF ACOUSTIC EXCITATION ON VORTEX STRUCTURE AND ENERGY SEPARATION IN JETS
Rask, R.B.
FLOW AND MASS TRANSFER IN A CURVED WALL JET
Ramsey, J. W.
FLOW AND TEMPERATURE FIELDS FOLLOWING INJECTION OF A JET NORMAL TO A CROSS STREAM
Burns, D.V.
MASS TRANSFER DOWNSTREAM OF A 90 DEGREE BEND IN A SQUARE DUCT
Stinson, Matthew
Effect of Swirled Leakage Flow on Endwall Film-Cooling
EFFECT OF FREESTREAM TURBULENCE ON RECOVERY FACTOR OF A CYLINDRICAL TEMPERATURE PROBE