Afficher dans l'index de A à Z
Nombre de vues :
288554

The term "polytropic" was originally coined to describe any reversible process on any open or closed system of gas or vapor which involves both heat and work transfer, such that a specified combination of properties were maintained constant throughout the process. In such a process, the expression relating the properties of the system throughout the process is called the polytropic path.

There are an infinite number of reversible polytropic paths between two given states; the most commonly used polytropic path is

(1)

where T is Temperature, S is Entropy, and C1 is a constant and is equal to zero for an adiabatic process. This path is equivalent to the assumption that the same amount of heat is transferred to the system in each equal temperature increment. In a reversible process following this polytropic path the heat and work transfer are as follows:

(2)

and

(3)

where H is Enthalpy.

Pressure and volume, and pressure and temperature are related by the following expressions:

(4)

and

(5)

where Cp and Cv are heat capacity at constant pressure and volume, respectively.

For an ideal gas this polytropic path simplifies to

(6)

where C2 and n are constants and n is called the polytropic index. The polytropic index characterizes the process, as summarized in Figure 1, and is given by

(7)

The equivalent pressure—temperature and work relationships are as follows:

(8)

and

(9)

Many gas compression and expansion processes may be usefully approximated by a polytropic process. In each case the polytropic coefficient must be determined experimentally by measurement of the heat and work transfer and the initial and final states.

Belt, Rowlinson, and Saville (1975) discuss the errors and inconsistencies which may arise when PVn = C2 is applied to nonideal gases and vapors.

Examples of simple polytropic processes.

Figure 1. Examples of simple polytropic processes.

REFERENCES

Bett, K. E., Rowlinson, J. S., and Saville, G. (1975) Thermodynamics for Chemical Engineers, The MIT Press, Cambridge MA.

Les références

  1. Bett, K. E., Rowlinson, J. S., and Saville, G. (1975) Thermodynamics for Chemical Engineers, The MIT Press, Cambridge MA.
Retour en haut de page © Copyright 2008-2024