A-Z インデックスで表示
表示回数:
70390

Stanton number for heat transfer, St, is a dimensionless parameter relating heat transfer coefficient to heat capacity of the fluid stream per unit cross-sectional area per unit time, i.e.,

where α is heat transfer coefficient; , mass flux; cp, specific heat capacity of the fluid; μ is velocity, and ρ, fluid density.

The analagous Stanton number for mass transfer is

where β is mass transfer coefficient.

The total rate of heat transfer, , to a fluid flowing inside a tube of diameter D and length L is given by

where and are appropriately averaged values of heat transfer coefficient and driving temperature difference, respectively, and ΔT is the temperature rise of the fluid over the length L. Hence

Therefore Stanton number, for a given geometry, is proportional to the temperature change in the fluid divided by the driving temperature difference.

A similar relationship can be derived for StM with concentration differences replacing temperature differences.

REFERENCES

Hewitt, G. F., Shires, G. L., and Bott, T. R. (1994) Process Heat Transfer, CRC Press.

参考文献

  1. Hewitt, G. F., Shires, G. L., and Bott, T. R. (1994) Process Heat Transfer, CRC Press.
トップへ戻る ©著作権 2008-2024